AMR Material Handling Robot
AMR Material Handling Robot
Lurking AGV (LMR) Handling Robot
- Detection Area: In this area, when the AGV detects an obstacle, it will flash a yellow light as a warning but will continue to move.
- Deceleration Area: In this area, when the AGV detects an obstacle, it will begin to slow down.
- Stop Area: In this area, when the AGV detects an obstacle, it will initiate an emergency stop.
Fork-type AGV (FMR) Handling Robot
Charging Pile
Charging Pile Functionality:
- Autonomous Charging for AGV:
Battery level between 70%-100%: AGV will continue operating without charging.
Battery level between 30%-70%: AGV will charge during idle time and will automatically stop charging to perform tasks when needed.
Battery level below 30%: Charging will begin after the current task is completed. The AGV will only resume tasks once the battery is above 30%.
Note: The above thresholds can be adjusted based on actual requirements.
2. Basic Requirements for AGV Charging Pile Installation:
Voltage: 220V AC; Power: Approximately 3500W
Socket: L+N+PE 10A socket (standard household three-prong socket)
Additional Equipment: The charging pile requires a separate 25A or higher circuit breaker or fuse.
Installation Space: A 30cm maintenance space should be left at the back during installation.
Installation Method: Use M8 anchor bolts for installation (4 points).
